Terms & Conditions
By accessing or using the Brivisize™ tool, you agree to the terms and conditions set out in the Brivis Website Terms and Conditions of use, and those also set out below. These conditions may change at any time without notice. By continuing to use this tool, you accept the conditions that are current at the time you use the site.
General System Design Conditions: Brivisize™ utilizes information regarding the home, such as its thermal properties, geographic location, the size and number of rooms or zones and ceiling heights. It applies climatic data and industry standards to determine the most appropriate size heating or cooling appliance to best service the home.
Heating systems are designed to maintain an indoor temperature of 21°C in Living Areas, 18°C in Sleeping Areas, at the standard ambient winter outdoor conditions for the specified location. Refrigerated Cooling systems are designed to maintain an indoor temperature of 24 °C at the user-nominated summer ambient conditions. The Indoor Design Condition for Evaporative Cooling is 27.4°C Dry Bulb at 38°C / 20% RH ambient summer conditions. This setting cannot be guaranteed due to the nature of the evaporative cooling process, which is dependent on the ambient temperature, humidity and ventilation characteristics of the home.
IMPORTANT NOTICE: Brivisize™ is a guide only. Laws, regulations and industry standards can vary between States and Territories. Accordingly, the guide must be read in conjunction with, and subject to, all laws, regulations and industry standards applicable in the State or Territory in which the products are installed.
Gas Ducted Heating Running Cost Data / Savings information.
- These are based on Australian Standard AS4556-2011
- House Heat Load 0.2MJ/HR/m3
- Annual Energy Consumption - as per AGA Star Ratings
- 600 Hours of operation (100 days at 6 hours per day)
- Natural Gas rate = 1.6 cents per MJ/HR
Actual savings may vary due to variations in factors such as fuel cost, house size, thermal insulation and heater usage patterns.
Brivis provides the Brivisize™ tool in good faith as a guide to product selection only. Any significant variance from the design specifications may have the effect of changing the result as to which appliance is most appropriate for the user. Brivis does not take any responsibility for erroneous estimations or information. Brivis will not be held responsible for any cost, loss or damage suffered as a result of relying upon the information contained in this tool should such information be incorrect or should it contain any error.
Unless otherwise indicated, Brivis either owns the copyright in the contents of this tool or is licensed to use it. Site contents can be printed but only for your personal use. None of the contents of Brivisize™ or any part in it may be reproduced, transferred, adapted, distributed or stored except with the express written permission of Brivis.
All information, ideas, concepts, know-how or techniques provided by you in Brivisize™, including the fact that you have utilized Brivisize™, shall be deemed to be non-confidential, and Brivis shall be free to use, disclose, reproduce, transmit, publish and distribute the information without limitation. You warrant that the information is available for such use by Brivis, and agree to indemnify Brivis if any third party takes action against Brivis in relation to information that you provide. Information will also be used to provide the consumer the Brivis Performance Guarantee.
Brivis reserves the right to revise the content of, or withdraw access to Brivisize™ at any time without notice.